Mwongozo wa Mtumiaji wa Bunduki ya Gundi Moto Isiyotumia Waya ya WORKPRO 3.6V

Utangulizi

Thank you for choosing the WORKPRO 3.6V Cordless Hot Glue Gun. This energy-saving, rechargeable glue gun kit is designed for various crafting and DIY projects, offering fast heating and a lightweight design for ease of use. It comes with 20 mini glue sticks and features an automatic safety power-off function. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

Taarifa za Usalama

• Always keep the glue gun away from children.
• Do not touch the nozzle or melted glue as they can reach high temperatures and cause burns.
• Use only glue sticks of the specified diameter (0.27" Dia) to prevent damage or malfunction.
• Hakikisha eneo la kazi lina hewa ya kutosha.
• Do not leave the hot glue gun unattended when it is powered on.
• Unplug or power off the glue gun when not in use or before performing any maintenance.
• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Allow the equipment to cool down completely before packing it away.
• This glue gun is made of flame-retardant materials and includes an 8-minute automatic safety power-off function for enhanced safety.

Yaliyomo kwenye Kifurushi

Tafadhali angalia yaliyomo kwenye kifurushi ili kuhakikisha kuwa bidhaa zote zipo na hazijaharibiwa:

• 1 x WORKPRO 3.6V Cordless Hot Glue Gun
• 20 x Mini Glue Sticks (0.27" Dia)
• 1 x Kebo ya Kuchaji ya Aina ya C
• 1 x Mwongozo wa Mtumiaji (hati hii)

Bidhaa Imeishaview

Familiarize yourself with the components of your WORKPRO Cordless Hot Glue Gun:

• Nozzle: Hutoa gundi iliyoyeyuka.
• Washa / ZIMA Zima: Powers the device on and off.
• Glue Stick Entry: Where glue sticks are inserted.
• Kiashiria cha LED: Displays heating status (red for heating, green for ready) and charging status (red for charging, green for charged).
• Kichocheo cha Kuchochea: Huwasha usambazaji wa gundi.
• Mlango wa Kuchaji wa Aina ya C: Kwa kuunganisha cable ya malipo.
• Msingi wa Kusimama Unaoweza Kurejeshwa: Provides stability when the gun is not in use.

Sanidi

Charging the Glue Gun

The WORKPRO hot glue gun is equipped with a 2500mAh rechargeable lithium battery. Before first use, or when the battery is low, charge the device:

1. Locate the Type-C charging port on the glue gun.
2. Connect the provided Type-C charging cable to the glue gun and to a 5V 1A power source (e.g., power bank, computer USB socket, car USB socket, or a USB wall adapter).
3. Kiashiria cha LED kitaonyesha nyekundu wakati inachaji na kugeuka kijani kikiwa kimechajiwa kikamilifu.

Maagizo ya Uendeshaji

Follow these steps to operate your hot glue gun:

1. Weka Fimbo ya Gundi: Insert a mini glue stick (0.27" diameter) into the back opening of the glue gun until it stops.
2. Washa: Press and hold the ON/OFF switch for 3 seconds. The LED indicator will light up red, indicating that the gun is heating.
3. Preheat: Allow the glue gun to preheat for approximately 90 seconds. The LED indicator will change from red to green when it is ready for use.
4. Weka Gundi: Once the LED is green, gently pull the trigger lever to dispense melted glue onto your desired surface.
5. Shut-otomatiki: The glue gun is equipped with an 8-minute automatic safety power-off function. If left idle for 8 minutes, it will automatically power off to conserve battery and enhance safety.

Vidokezo Muhimu:

• Do not pull out the melting glue stick from the glue gun after work is finished; keep it inside for next use.
• Zima kifaa na uruhusu kipoe kabisa kabla ya kukipakia.
• The glue gun features a less-drip nozzle design to reduce glue spillage and keep your work area clean.

Matengenezo

• Kusafisha: Ensure the glue gun is completely cool before cleaning. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
• Utunzaji wa Nozzle: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can be carefully removed once the gun is cold.
• Hifadhi: Store the glue gun in a cool, dry place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the chamber if storing for an extended period.
• Utunzaji wa Betri: Kwa muda bora wa matumizi ya betri, epuka kutoa betri nzima mara kwa mara. Ichaji mara kwa mara, hata kama haitumiki kila wakati.

Kutatua matatizo

Vipimo

Udhamini na Msaada

For warranty information and customer support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO store on Amazon: Duka la WORKPRO