Intex 28036

Intex 2.6m x 1.6m Rectangular Pool Cover (Model 28036) Instruction Manual

Model: 28036 | Brand: Intex

Utangulizi

This manual provides essential instructions for the proper installation, operation, and maintenance of your Intex 2.6m x 1.6m Rectangular Pool Cover, Model 28036. This cover is designed to fit Intex rectangular frame pools measuring 2.60m x 1.60m, offering protection from debris and reducing water evaporation. Please read all instructions carefully before use to ensure safe and effective product performance.

Taarifa za Usalama

ONYO: Keep children and pets away from the pool area when the cover is in use. Ensure the cover is properly secured and drained to prevent accidents. A pool cover is not a substitute for adult supervision. Always supervise children and pets around the pool.

Yaliyomo kwenye Kifurushi

Thibitisha kwamba vipengele vyote vipo kabla ya kuendelea na usakinishaji:

  • Intex 2.6m x 1.6m Rectangular Pool Cover (Model 28036E)
  • Cable Ties (for securing the cover)

Maagizo ya Kuweka

Follow these steps to properly install your pool cover:

  1. Tayarisha bwawa: Ensure your rectangular frame pool (2.60m x 1.60m) is clean and free of large debris before covering.
  2. Weka Jalada: Carefully unfold the pool cover and place it over the pool, ensuring it is centered. The cover is designed with a 20 cm (8 inch) overhang to fit securely over the pool frame.
  3. Salama kwa Viunga vya Kebo: Locate the rope ties integrated into the cover's edge. Thread these ties around the pool's frame or support legs and pull them taut. Secure the ties firmly to prevent the cover from being dislodged by wind or other external factors.
Intex pool cover installed on a rectangular frame pool in a garden

Image: The Intex rectangular pool cover properly installed over a pool, showing the overhang.

A hand securing the Intex pool cover to the pool frame

Image: Close-up of a hand securing the pool cover to the pool frame, demonstrating the securing process.

Close-up of the cable ties on the Intex pool cover

Image: Detail of the cable ties used to secure the pool cover.

Maagizo ya Uendeshaji

The pool cover is designed for simple operation:

  • Ulinzi wa uchafu: The cover effectively prevents leaves, insects, and other debris from entering the pool water, keeping it cleaner.
  • Mkusanyiko wa Maji: The cover features integrated drainage holes. These holes are designed to prevent excessive water accumulation (e.g., from rain) on top of the cover, which could cause sagging or damage. The water drains directly into the pool.
  • Evaporation Reduction: By covering the pool, you can significantly reduce water evaporation, especially during hot or windy conditions.
Close-up of drainage holes on the Intex pool cover

Image: Detail of the drainage holes on the pool cover, designed to prevent water accumulation.

Matengenezo

Proper maintenance extends the life of your pool cover:

  • Kusafisha: Regularly clean the top surface of the cover to remove accumulated dirt, leaves, and other debris. A soft brush or hose can be used.
  • Kukausha: When not in use for extended periods, ensure the cover is thoroughly cleaned and dried before folding and storing. This prevents mold and mildew growth.
  • Hifadhi: Store the dry cover in a cool, dry place away from direct sunlight and extreme temperatures.

Kutatua matatizo

Hapa kuna suluhisho kwa maswala ya kawaida:

  • Kuweka maji kwenye kifuniko: Ensure the drainage holes are clear of debris. Check that the cover is tautly secured to allow water to drain effectively through the designated holes.
  • Cover not fitting securely: Verify that the cover is correctly sized for your 2.60m x 1.60m rectangular pool. Ensure the cable ties are pulled tight and securely fastened around the pool frame.
  • Cover damage (tears/rips): Inspect the cover regularly for any signs of wear or damage. Small tears may be repairable with a vinyl repair kit. For significant damage, replacement may be necessary.

Vipimo vya Bidhaa

KipengeleVipimo
Nambari ya Mfano28036
Compatible Pool Size2.60m x 1.60m Rectangular Frame Pools
Zaidisentimita 20 (inchi 8)
NyenzoVinyl
RangiBluu
Vipengele MaalumMashimo ya mifereji ya maji
Aina ya KufungwaDrawstring (Cable Ties)
Uzito wa KipengeeKilo 1.5
Nchi ya AsiliChina
Diagram showing the dimensions of the Intex pool cover: 260 cm length, 160 cm width, and 20 cm overhang

Image: Dimensional diagram illustrating the cover's length (260 cm), width (160 cm), and 20 cm overhang.

Taarifa ya Udhamini

For detailed warranty information regarding your Intex pool cover, please refer to the warranty card included with your purchase or visit the official Intex webtovuti. Sheria na masharti ya udhamini yanaweza kutofautiana kulingana na eneo.

Usaidizi wa Wateja

If you have any questions, require assistance, or need to report an issue with your Intex pool cover, please contact Intex customer support. Contact details can typically be found on the product packaging or the official Intex webtovuti.

© 2026 Intex. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.