ErGear Dual Monitor Stand EGCM3-E Instruction Manual

Utangulizi

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand, model EGCM3-E. Please read this manual thoroughly before installation and retain it for future reference. This monitor stand is designed to support two monitors ranging from 13 to 32 inches, with a maximum weight capacity of 8 kg (17.6 lbs) per arm.

Taarifa za Usalama

Hakikisha vipengele vyote vipo na havijaharibika kabla ya kuviunganisha. Usitumie ikiwa sehemu yoyote haipo au ina kasoro.
Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) per arm. Overloading may result in instability and potential injury.
This stand is compatible with VESA mounting patterns of 75x75mm and 100x100mm. Verify your monitor's VESA pattern before installation.
Always use two people for lifting and mounting monitors to prevent injury.
Ensure the stand is placed on a stable, level surface.
Weka watoto na wanyama wa kipenzi mbali wakati wa kusanyiko.

Yaliyomo kwenye Kifurushi

Tafadhali angalia ili kuhakikisha kuwa sehemu zote zimejumuishwa kwenye kifurushi chako:

Bamba la msingi
Msaada Pole
Monitor Arms (2)
Sahani za VESA (2)
Cable Management Sehemu
Kifaa cha Vifaa (skrubu, mashine za kuosha, funguo za Allen)

Maagizo ya Kuweka

Step 1: Assemble the Base and Pole

Attach the support pole to the base plate using the provided screws. Ensure the connection is secure and stable.

Image showing the sturdy base plate and support pole dimensions (41cm x 26cm).

The sturdy base plate provides stability for the dual monitor setup. Dimensions are approximately 41cm by 26cm.

Step 2: Attach Monitor Arms to the Pole

Slide the monitor arms onto the support pole. Adjust them to your desired height and tighten the securing mechanism. Note that both arms adjust vertically together.

Hatua ya 3: Ambatisha Bamba za VESA kwa Wachunguzi

Secure the VESA plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the VESA pattern (75x75mm or 100x100mm) matches.

Image showing a monitor attached to the VESA plate and arm, indicating support for up to 8kg per arm and compatibility with 13-32 inch screens, VESA 75x75mm and 100x100mm.

Each arm is designed to hold monitors up to 8 kg (17.6 lbs) and supports VESA 75x75mm or 100x100mm mounting patterns for 13-32 inch screens.

Step 4: Mount Monitors to Arms

Carefully slide the monitors (with VESA plates attached) onto the monitor arms. Secure them in place with the locking screws or clips provided.

Uendeshaji na Marekebisho

The ErGear Dual Monitor Stand offers a range of adjustments for optimal viewing comfort and ergonomic positioning.

Marekebisho ya Urefu

To adjust the height of both monitors, loosen the collar on the support pole, slide the arms to the desired height, and then re-tighten the collar. The maximum height extension is approximately 42cm.

Image showing two monitors mounted on the stand, illustrating the ability to raise monitors up to 42cm for ergonomic viewing.

Monitors can be raised up to 42cm from the desk surface to achieve an ergonomic viewurefu.

Tilt, Swivel, and Rotation

Each monitor arm allows for flexible positioning:

Teke: Adjust the monitor screen ±45° (up or down) to reduce glare and optimize viewpembe za pembe.
Sogeza: Pivot the monitor 180° (left or right) to share your screen or change viewmwelekeo.
Mzunguko: Zungusha kifuatiliaji kwa digrii 360 ili kubadilisha kati ya mwelekeo wa mandhari na picha.

Image demonstrating the flexible adjustments of the monitor stand, including tilt ±45°, swivel 180°, and 360° rotation.

The stand allows for versatile adjustments including tilt, swivel, and full 360-degree rotation for each monitor.

Image showing two monitors mounted on the stand, one in landscape and one in portrait orientation, demonstrating rotation capability.

Easily switch monitors between landscape and portrait modes for different tasks.

Usimamizi wa Cable

The stand features integrated cable management clips to keep your workspace tidy and organized. Route your monitor and power cables along the arms and down the support pole using the provided clips.

Image showing the back of two monitors with cables neatly routed along the monitor arms and down the central pole using cable management clips.

Utilize the integrated cable management system to maintain a clean and organized desk environment.

Matengenezo

Mara kwa mara angalia skrubu na miunganisho yote ili kuhakikisha kuwa zinasalia kuwa ngumu na salama.
Safisha stendi kwa laini, damp kitambaa. Epuka visafishaji abrasive au vimumunyisho.
Do not lubricate any moving parts unless specifically instructed by the manufacturer.

Kutatua matatizo

Monitors are not level:

Check if the VESA plates are securely attached to both monitors and the arms. Ensure the arms are at the same height on the pole. Minor adjustments can often be made by slightly loosening and re-tightening the VESA plate screws.

Stand inahisi kutokuwa thabiti:

Verify that the base is on a flat, stable surface. Ensure all screws, especially those connecting the pole to the base, are fully tightened. Confirm that the combined weight of your monitors does not exceed the stand's capacity.

Difficulty adjusting tilt/swivel:

Some joints may have tension adjustment screws. Refer to the assembly diagrams for specific locations and use the provided Allen key to loosen or tighten as needed.

Vipimo

Kipengele	Vipimo
Nambari ya Mfano	EGCM3-E
Chapa	ErGear
Saizi ya Skrini Sambamba	inchi 13-32
Uwezo wa Uzito kwa Kila Mkono	Kilo 8 (pauni 17.6)
Utangamano wa VESA	75x75mm, 100x100mm
Pembe ya Kuinamisha	±45°
Pembe ya Kuzunguka	180°
Mzunguko	360°
Nyenzo	Chuma cha pua
Rangi	Nyeusi
Aina ya Kuweka	Msingi wa Kusimama

Udhamini na Msaada

For warranty information or technical support, please refer to the documentation included with your purchase or contact ErGear customer service directly. Contact details can typically be found on the manufacturer's official webtovuti au kwenye ufungaji wa bidhaa.

ErGear EGCM3-E