Taa ya Mafuriko ya Utilitech yenye Kiwango cha Shahada 110 yenye Kichwa 1 ya Shaba ya Nishati ya Jua Inayoendeshwa na LED Iliyounganishwa na Mwendo na Mwongozo wa Mtumiaji wa Kipima Muda

Utangulizi

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 110-Degree 1-Head Bronze Solar Powered Integrated LED Motion-Activated Flood Light with Timer. This solar-powered floodlight is designed for outdoor security lighting, offering a convenient and energy-efficient solution for illuminating areas such as front yards, backyards, gardens, pathways, and porches. It features an advanced amorphous solar panel for green energy utilization, a dusk-to-dawn sensor to prevent daytime illumination, and a selectable timer for 1 or 3 minutes of light duration.

Taarifa za Usalama

Tafadhali soma na uelewe maagizo yote kabla ya kusakinisha au kutumia bidhaa hii. Kushindwa kufuata maagizo haya kunaweza kusababisha mshtuko wa umeme, moto, au hatari zingine ambazo zinaweza kusababisha uharibifu wa mali au jeraha la kibinafsi.

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal battery charging.
• Do not attempt to disassemble or modify the product. There are no user-serviceable parts inside except for battery replacement.
• Keep the solar panel and light fixture clean from dirt, snow, or debris to maintain charging efficiency and light output.
• Bidhaa hii imeundwa kwa matumizi ya nje na haiwezi kuingiwa na maji. Hata hivyo, epuka kuiingiza ndani ya maji.
• When replacing batteries, use only the specified type and rating (two 1000 mAh 18500 lithium phosphate solar rechargeable batteries).
• Tupa betri za zamani kulingana na kanuni za ndani.

Yaliyomo kwenye Kifurushi

Thibitisha kuwa vipengele vyote vipo kabla ya kuanza usakinishaji.

• 1x LED Flood Light Unit with Motion Sensor
• 1x Solar Panel with 20-ft Cord
• Vifaa vya Kuweka (screws, nanga)
• 2x 1000 mAh 18500 Lithium Phosphate Solar Rechargeable Batteries (pre-installed or included separately)

Image: The complete Utilitech solar flood light system, showing the LED light unit with motion sensor, the separate solar panel, and the connecting cord.

Vipengele vya Bidhaa

• Nishati ya jua: Easy installation without electrical wiring.
• Mwendo Umewashwa: 110-degree detection range up to 40 feet.
• LED iliyojumuishwa: Maintenance-free LED technology with 350 lumens brightness and 5000K cool white light.
• Kihisi cha Machweo hadi Alfajiri: Automatically prevents illumination during daylight hours.
• Kipima Muda Kinachoweza Kurekebishwa: Selectable light duration of 1 or 3 minutes.
• Inayoweza kubadilishwa Lamp Kichwa: Allows for precise light direction.
• Chanzo cha Nguvu: Two 1000 mAh 18500 lithium phosphate solar rechargeable batteries (included).
• Usakinishaji: Suitable for wall and eave mount.
• Urefu wa kamba: 20-ft cord connecting the solar panel to the light unit.

Kuweka na Kuweka

Follow these steps for proper installation of your solar flood light.

1. Choose a Location for the Solar Panel: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid areas shaded by trees, buildings, or other obstructions. The 20-ft cord allows flexibility in placing the solar panel away from the light unit for optimal sun exposure.
   

   Picha: Karibu view of the solar panel with its mounting base and connecting cord.
2. Weka Paneli ya Jua: Use the provided mounting hardware to securely attach the solar panel to a wall or eave. Ensure the panel is angled to maximize sun exposure.
3. Choose a Location for the Flood Light: Select a desired location for the flood light unit. This can be a wall or eave. Consider the 110-degree motion detection range and the area you wish to illuminate.
   

   Image: The Utilitech flood light unit, showing the LED light head and the motion sensor at the bottom.

4. Mount the Flood Light: Securely attach the flood light unit to the chosen surface using the appropriate mounting hardware.
5. Connect the Solar Panel to the Light Unit: Plug the 20-ft cord from the solar panel into the designated port on the flood light unit. Ensure a secure connection.
   

   Image: An installed Utilitech solar flood light and solar panel on a wall, demonstrating the connection.

6. Kurekebisha Lamp Head and Motion Sensor: Loosen the adjustment screws on the lamp head and motion sensor to position them for optimal coverage. Tighten the screws once adjusted.
7. Malipo ya awali: Allow the solar panel to charge the batteries for at least 24-48 hours in direct sunlight before initial use to ensure full battery capacity.

Maagizo ya Uendeshaji

Your Utilitech solar flood light is designed for automatic operation.

• Uendeshaji Otomatiki: The integrated dusk-to-dawn sensor will detect ambient light levels. The flood light will only activate when motion is detected during nighttime hours.
• Utambuzi wa Mwendo: The motion sensor has a 110-degree detection angle and can detect movement up to 40 feet away. Position the sensor to cover the desired area.
• Mpangilio wa Kipima Muda: Locate the timer switch on the flood light unit. You can select between a 1-minute or 3-minute illumination duration after motion is detected.
• Adjustable Detection Sensitivity: The motion sensor sensitivity can be adjusted. Refer to the markings on the sensor for specific settings (if available on your model).

Matengenezo

Matengenezo ya mara kwa mara huhakikisha utendaji bora na uimara wa taa yako ya mafuriko.

• Kusafisha: Periodically clean the solar panel and the LED light lens with a soft, damp cloth to remove dirt, dust, or debris. A clean solar panel ensures efficient charging.
• Ubadilishaji wa Betri: The flood light is powered by two 1000 mAh 18500 lithium phosphate solar rechargeable batteries. If the light output diminishes significantly or the light stops working, the batteries may need replacement. Replacement batteries (Lowe's item # 605119) are sold separately.

  Kubadilisha betri:

  1. Carefully open the battery compartment on the flood light unit.
  2. Ondoa betri za zamani na uondoe vizuri.
  3. Insert new 18500 lithium phosphate solar rechargeable batteries, ensuring correct polarity.
  4. Funga sehemu ya betri kwa usalama.

• Teknolojia ya LED: The integrated LED technology is maintenance-free and does not require bulb replacement.

Kutatua matatizo

If your flood light is not functioning as expected, refer to the following common issues and solutions.

Vipimo

Udhamini na Msaada

For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt for warranty claims.

Replacement batteries (Lowe's item # 605119) are available for purchase separately.