TMH TMH-25LED-R
TMH 6-Inch Oval Arrow LED Red Tail Lights (2-Pack) Instruction Manual

Kielelezo cha 1: Zaidiview of TMH 6-Inch Oval Arrow LED Red Tail Lights.
1. Utangulizi
Thank you for choosing TMH 6-Inch Oval Arrow LED Red Tail Lights. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lights. Please read these instructions thoroughly before installation and retain this manual for future reference. These lights are designed for use as tail lights and turn signals on various vehicles including trucks, trailers, buses, and dump trucks, operating on a 12V DC system.

Picha ya 1.1: TMH 6-Inch Oval Arrow LED Red Tail Lights. This image displays two red oval LED lights, each featuring an arrow pattern. Four mounting screws are visible in the foreground.
Each light features 25 super bright F3 Piranha LEDs arranged in an arrow pattern, providing clear visibility and signaling.

Picha ya 1.2: LED Count and Arrow Pattern. This image provides a close-up view of the light's lens, clearly showing the 25 individual F3 Piranha LEDs arranged to form a distinct arrow shape.

Picha ya 1.3: F3 Piranha LED. This image shows a detailed view of the F3 Piranha LED component used in the lights, known for its brightness and durability.
2. Taarifa za Usalama
- Daima tenga betri ya gari kabla ya kufanya kazi yoyote ya umeme ili kuzuia mshtuko wa umeme au saketi fupi.
- Ensure all wiring connections are secure and properly insulated to prevent corrosion and electrical faults.
- Thibitisha kuwa ujazo wa uendeshajitage of your vehicle is 12V DC. Connecting to an incorrect voltage may damage the lights.
- Vaa vifaa vya kinga vya kibinafsi vinavyofaa, kama vile miwani ya usalama na glavu, wakati wa ufungaji.
- Do not modify the lights or their components. Unauthorized modifications may void the warranty and create safety hazards.
- Ikiwa huna uhakika kuhusu sehemu yoyote ya mchakato wa usakinishaji, wasiliana na fundi umeme wa magari aliyehitimu.
3. Yaliyomo kwenye Kifurushi
Kifurushi ni pamoja na vitu vifuatavyo:
- 2 x TMH 6-Inch Oval Arrow LED Red Tail Lights
- 4 x Screws za Kuweka
4. Vipimo
| Kipengele | Maelezo |
|---|---|
| Chapa | TMH |
| Nambari ya Mfano | TMH-25LED-R |
| Aina ya Mwanga | LED Tail Light / Turn Signal |
| Kiasi cha LED | 25 Piranha LEDs per light |
| Rangi | Red Light & Red Lens |
| Kazi | Tail Light (Low Brightness), Brake/Turn Signal (High Brightness) |
| Uendeshaji Voltage | 12V DC |
| Wattage | 3.31 watts |
| Aina ya Kuweka | Mlima wa Uso |
| Vipimo (L x W x H) | Inchi 7.5 x 3.3 x 1 |
| Nyenzo | ABS Housing, Polycarbonate Lens |
| Vipengele | Waterproof, Shockproof, Dustproof |
| UPC | 757347529700 |

Picha ya 4.1: Product Dimensions. This diagram illustrates the oval shape and measurements of the light, indicating a length of 7.5 inches, a width of 3.3 inches, and a depth of 1 inch.
5. Ufungaji
5.1 Angalia Kabla ya Kusakinisha
- Ensure the mounting surface is clean, flat, and free from obstructions.
- Confirm that the vehicle's electrical system is 12V DC.
- Gather necessary tools: drill, screwdriver, wire strippers, crimpers, electrical tape or heat shrink tubing.
5.2 Maagizo ya Kuweka
- Position the light on the desired surface. Ensure the arrow pattern is oriented correctly for the intended signal direction.
- Mark the locations for the four mounting screws.
- Drill pilot holes if necessary, ensuring they are appropriately sized for the provided screws.
- Secure the light to the surface using the provided mounting screws. Do not overtighten.
5.3 Mchoro wa Wiring na Viunganisho
The TMH LED Tail Lights feature a 3-wire connection system for dual-functionality (low brightness for tail light, high brightness for brake/turn signal).
- Waya Nyeusi: Uwanja (-)
- Waya Nyekundu: Low Brightness (Tail Light / Running Light) (+)
- Waya Mweupe: High Brightness (Brake Light / Turn Signal) (+)
- Unganisha Waya mweusi from the light to the vehicle's chassis ground or negative (-) terminal.
- Unganisha Waya nyekundu from the light to the vehicle's tail light or running light positive (+) circuit. This will activate the low brightness mode.
- Unganisha Waya nyeupe from the light to the vehicle's brake light or turn signal positive (+) circuit. This will activate the high brightness mode.
- Ensure all connections are secure and protected from moisture and abrasion using electrical tape or heat shrink tubing.

Picha ya 5.1: Wiring Diagram. This image illustrates the three-wire connection: black for ground, red for low brightness (tail light), and white for high brightness (brake/turn signal).

Picha ya 5.2: Two-Step Brightness Function. This image demonstrates the difference between the low brightness (Step 1) and high brightness (Step 2) modes of the LED light.
6. Uendeshaji
Once properly installed and wired, the TMH 6-Inch Oval Arrow LED Red Tail Lights will operate as follows:
- When the vehicle's running lights or tail lights are activated, the lights will illuminate at mwangaza mdogo (via the Red wire connection).
- When the vehicle's brake pedal is pressed or the turn signal is activated, the lights will illuminate at mwangaza wa juu (via the White wire connection). If used as a turn signal, the high brightness will flash according to the vehicle's flasher relay.
Kumbuka: If you intend to use these lights solely as turn signals or emergency lights, a flasher relay or controller (not included) may be required for proper flashing functionality.
7. Matengenezo
The TMH LED Tail Lights are designed for durability and minimal maintenance.
- Kusafisha: Clean the lens periodically with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners or solvents.
- Ukaguzi: Regularly inspect the lights and wiring for any signs of damage, loose connections, or corrosion. Address any issues promptly to maintain optimal performance and safety.
- Upinzani wa Hali ya Hewa: These lights are waterproof, shockproof, and dustproof, designed to withstand various environmental conditions.

Picha ya 7.1: Waterproof and Weatherproof Design. This image shows the light being exposed to water, highlighting its resistance to environmental elements.
8. Utatuzi wa shida
If you encounter issues with your TMH LED Tail Lights, refer to the following troubleshooting guide:
| Tatizo | Sababu inayowezekana | Suluhisho |
|---|---|---|
| Taa haziangazi | No power supply, incorrect wiring, faulty ground connection, blown fuse. |
|
| Lights are dim or flicker | Muunganisho duni wa umeme, volti haitoshitage, corrosion in wiring. |
|
| Kiwango kimoja tu cha mwangaza hufanya kazi | Incorrect wiring for Red or White wire, faulty connection. |
|
If troubleshooting steps do not resolve the issue, please contact TMH customer support.
9. Udhamini na Msaada
9.1 Taarifa ya Udhamini
TMH provides a 1-year Premium TMH warranty for these LED Tail Lights, covering free replacement for manufacturing defects. Please retain your proof of purchase for warranty claims.
9.2 Usaidizi kwa Wateja
For technical assistance, warranty claims, or any questions regarding your TMH product, please visit the official TMH webtovuti au wasiliana na idara yao ya usaidizi kwa wateja.
TMH Brand Store: https://www.amazon.com/stores/TMH/page/47AA2177-AADC-4F12-A7C1-4D521FE33484
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.