tectake Set 2 Bar Stools Johannes 401561 - Instruction Manual

Utangulizi

This manual provides essential information for the safe assembly, operation, and maintenance of your tectake Set of 2 Bar Stools, Model Johannes 401561. Please read these instructions carefully before use and retain them for future reference.

Maagizo ya Usalama

To ensure safe use and prevent injury, please observe the following:

• Daima kusanya kulingana na maagizo yaliyotolewa.
• Do not use on wet or uneven surfaces to prevent tipping.
• This stool is not intended for use by children.
• Always supervise small children when this stool is in use.
• The maximum recommended weight capacity for this stool is 120 kg. Do not exceed this limit.

Yaliyomo kwenye Kifurushi

Before beginning assembly, please ensure all components listed below are present and undamaged:

• 2 x Bar Stools (Johannes Model 401561)
• Assembly Accessories (screws, washers, tools if included)
• Maagizo ya Mkutano (mwongozo huu)

Vipimo vya Kiufundi

Maagizo ya Mkutano

Follow these steps carefully to assemble your bar stools. It is recommended to have two people for assembly to ensure stability and ease of handling.

1. Fungua Vipengee: Carefully unpack all components from the packaging. Verify that all parts listed in the 'Package Contents' section are present and free from damage.
2. Ambatisha Kiegemeo cha Miguu: Slide the footrest onto the chrome column. Ensure it is positioned correctly and securely fastened according to the accessory instructions.
3. Insert Gas Lift into Base: Place the gas lift cylinder into the central hole of the base plate. The plastic ring on the base plate should be facing downwards to protect your floor.
4. Ambatisha Kiti Kimo: Carefully place the assembled seat unit onto the top of the gas lift cylinder. Apply gentle pressure until it clicks securely into place.
5. Ukaguzi wa Mwisho: Before full use, test the stability of the stool and the functionality of the height adjustment mechanism. Ensure all connections are tight.

Maagizo ya Uendeshaji

Marekebisho ya Urefu

The tectake Johannes bar stool features a gas lift mechanism for smooth height adjustment. The lever is located under the seat on the right side.

• Kuinua Kiti: While standing, lift the lever upwards. The gas lift will extend, raising the seat.
• Ili kupunguza kiti: While seated, lift the lever upwards and apply your weight to compress the gas lift, lowering the seat.

Release the lever to lock the seat at your desired height.

Kazi ya Kuzunguka

The seat can rotate 360 degrees, providing flexibility and ease of movement. Simply turn the seat in the desired direction.

Utunzaji na Utunzaji

Kusafisha

The faux leather surface and chrome parts are designed for easy cleaning:

• Wipe the faux leather seat with a damp cloth. For more stubborn stains, a mild soap solution can be used.
• Clean chrome parts with a soft, damp kitambaa.
• Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the faux leather and chrome finish.
• Always dry thoroughly after cleaning to prevent water spots or damage.

Utunzaji wa Jumla

• Regularly check all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
• Avoid exposing the stool to direct sunlight or extreme temperatures for prolonged periods, as this may cause material degradation or fading.
• The plastic ring on the base is designed to protect your floor. Ensure it remains intact and clean to prevent scratches.

Kutatua matatizo

If you encounter any issues with your tectake bar stools, please refer to the following common problems and solutions:

Stool feels unstable or wobbly

• Suluhisho: Check all assembly connections. Ensure all screws are tightened securely. Verify that the stool is placed on a flat, even surface. Uneven flooring can cause instability.

Urekebishaji wa urefu haufanyi kazi

• Suluhisho: Ensure the gas lift lever is fully engaged when attempting to adjust the height. If the issue persists, the gas lift cylinder may be faulty and require replacement. Contact customer support for assistance.

Kelele za mlio wakati wa matumizi

• Suluhisho: Apply a small amount of silicone spray to moving parts, such as the swivel mechanism or the connections around the gas lift cylinder. Avoid using oil-based lubricants on the gas lift itself.

Udhamini na Msaada

For warranty information, technical support, or to inquire about replacement parts, please contact tectake customer service.

You can typically find contact details on the official tekta webtovuti or through the platform where you purchased the product.

When contacting support, please have your model number (Johannes 401561) and proof of purchase ready to expedite the process.